Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Buying ARM development board suggestions

Status
Not open for further replies.

js0p

Junior Member level 1
Joined
Apr 10, 2008
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,399
futurlec lpc2368

Dear all,

hi :D. I would like to purchase an ARM based development board but there are so many boards available that I don't know which one to choose, so I will appreciate any piece of advice.

I want the board has USB, Ethernet and SD/MMC and also an embedded linux can run in it (so I suppose it must to be ARM9 or greater. I'm a beginner in ARM processors, so please forgive me if I'm wrong). Other capabilities don't matter.

Thanks a lot
js0p
 

lpc-e2468 gerbers

Try Olimex they are pretty good and also you can try emqbit they also provide the gerbers incase you want to make it.:D
 

beginner arm development board olimex

Hi,

my recommendation would be a board from Embedded Artists with an ARM7 and an LPC2478, provides everything you are asking for.
Some information about the LPC2000 devices, including the LPC2478 can be found here:
http://www.lpc2000.com
In regards to tools, including boards, there is more information here:
http://www.lpc2000.com/tools

Happy holidays, Bob
 

Thank you bob for your suggestion. I suppose you refered to this board **broken link removed**
, which is very nice but it is too expensive for me :(

I found this one in the Olimex website https://www.olimex.com/dev/lpc-e2468.html as maheshkuruganti suggested. It comes with a pre-loaded uC Linux and it has just what I want (USB, Ethernet, SD/MMC).

However, any more suggestions will be welcome.

Kind regards :D
Js0p
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top