Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Building an adder with transistors in analog library

Status
Not open for further replies.
B

bob_lv

Member level 1
Joined
Dec 19, 2005
Messages
37
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,660
About building an adder

If I build a 20-bit adder with transisters in analog library (because I don't have digital library), is it much different from the adder building with digital standard cell? And what should I pay attention to build it? When it is finished, how can I simulate it easily? The software I used is Cadance.
Thanks!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top