TiagoRibeiro
Full Member level 2
- Joined
- Oct 29, 2013
- Messages
- 130
- Helped
- 18
- Reputation
- 36
- Reaction score
- 17
- Trophy points
- 28
- Location
- São Paulo/Brazil
- Activity points
- 765
I am beginner in the Altium, and need guidance on how to proceed with the schematic and pcb layout mainly. The board will keep all the components welded on one side only. The other side will need to be free to be engaged in an LCD. I have many doubts, did just a basic course to know and use the basic tools available in Altium.
It will be very difficult to do this task with such knowledge?
I need to save the maximum of possible space.
What is the best way to position the layers?
I was thinking like this:
Top GND =
Middle 1 = 3V3
2 = middle Signal
Bottom = Signal
I saw in some projects a tool called Split Plane, but do not know use it there, I'll do a little research on it.
Any help will be greatly appreciated.
Thanks for your Help.:wink:
It will be very difficult to do this task with such knowledge?
I need to save the maximum of possible space.
What is the best way to position the layers?
I was thinking like this:
Top GND =
Middle 1 = 3V3
2 = middle Signal
Bottom = Signal
I saw in some projects a tool called Split Plane, but do not know use it there, I'll do a little research on it.
Any help will be greatly appreciated.
Thanks for your Help.:wink: