Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Buck Converter drawing huge current

Status
Not open for further replies.

Ehab Abdalla

Newbie level 6
Newbie level 6
Joined
Sep 14, 2012
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,388
the capacitor at the output of buck converter draws huge current and i need to reduce it,can anyone tell me how !!!!
Thanks in advance.
 

Circuit.JPG
Current through C3 is large 'exceeds 20Amp.'
What I want to know is there any efficient method to limit the current through the capacitor ?!
output voltage should be 24V
 

Without knowing the frequency you are using and the load current, the most likely problem is that either the diodes cannot switch fast enough or the inductor is the wrong value. It sounds as though you are simply switching 48V on/off across the capacitor making it appear almost as a short circuit. Are you measuring the current in a real circuit or is this a simulation?

Brian.
 

I presume you are talking about AC current? Without knowing the other circuit parameters (output current and switching frequency) we can't say if 20 A ripple is normal operation or not. Generally speaking, you might:
- increase the converter inductance
- increase the switching frequency
- accept the high ripple current and use output capacitors that can stand it
- implement a multi-phase buck converter with reduced output ripple
 

I believe the important question here is: How did you actually measure the current in the capacitor?
The second question would be: are those 20 amps peak or RMS amps?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top