Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

BSIM Level 60 MOS with PTM model using eldo simulations. Need help about parameters.

Status
Not open for further replies.
I

Izhar Hussian

Newbie level 1
Newbie level 1
Joined
Jul 21, 2014
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
7
Hey guys, I am working on Nanohub's MASTAR tool and PTM on the same time. My goal is to create new physical data for a CAD tool we are designing. We are using MASTAR equations. I have extracted some of the data from PTM cards for 32 nm, 45 etc like TOXE, XJ, NDEP, NGATE, NSD, U0, VTH0 . But i wish to find more parameters but they are not understandable. Can anybody help me with the explanation of parameters specifically related to VTh, Ion, Ioff equations.

regards
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top