Hi, Element7K: I think it is hard to find an traditional patch antenna (patch on one side and ground plane on the other side to form a cavity) with so wide frequency range. The reason is that the volume for the antenna is too small. To make it wide band, I think you should increase the volume for it. A typical example is an aperture coupled patch. Basically, you should at least try to avoid the resonator's field concentrated inside the substrate. For example, you can make a modified printed dipole with each arm to be oval shape. It has very good wide band behaviour. It looks like it is low profile. However, it does use much of the space. Its wide band behaviour relies upon the space on both sides of the substrate supporting the patches. If you use the space for other purposes by putting some other elements into the space, the wide band behaviour will be gone. In summary, you should try to increase the space for the field in order to get wide band radiator.
Best regards.