Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Bluetooth protocol stack - any recommendation?

Status
Not open for further replies.

Colombo

Junior Member level 2
Joined
Mar 27, 2002
Messages
21
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
118
Bluetooth protocol stack

Hi,

can anybody recommend Bluetooth protocol stack above HCI UART/H4 level?

Whether there are free or demo implementations of stack with source code? Or compiled for ARM7 processor?

I am intended to use CSR BlueCore2 chip. Do you have experience with its BlueLab and BCHS (BlueCore Host Software) stacks?
 

Looks like nobody answered for so long time... Strange...

If you looking for commercial stack - try I*A*R Bluetooth stack that is supplied as database for I*A*R Make*App. You select functions that you need, processor, compiler, RTOS - and get a optimised sources...

Not yet tested it personally, but friends who downloaded demo told that I*A*R claims is close to reality... ;-)
 

Bluetooth

Hi brothers!
The software supplyed by IAR must have full because the demo version not have code generation and the processors.
Little detail: The processor´s is shiped separately!!!
gorkin
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top