Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Bluetooth Modules with USB Compatibilty interface

Status
Not open for further replies.
P

phutanesv

Full Member level 2
Joined
Apr 26, 2007
Messages
149
Helped
19
Reputation
38
Reaction score
7
Trophy points
1,298
Activity points
2,221
Hi , could any one suggest Class2 Bluetooth module that has USB compatibilty to interface with the microcontroller. Meaning the Bluetooth module should have D+ and D- so that it could interfaced to the microcontroller.

regards
Phutanesv
 

BT module will have TTL interface and some both TTL and RS232. Use a RS232, TTL, USB module. Connect TTL of Adapter to BT module TTL pins in cross connection and you will have BT to USB. Connect USB to uC USB pins.

**broken link removed**

I don't know whether uC will be able to communicate with BT this way but interfacing is as above.
 

jayanth.devarayanadurga said:
BT module will have TTL interface and some both TTL and RS232. Use a RS232, TTL, USB module. Connect TTL of Adapter to BT module TTL pins in cross connection and you will have BT to USB. Connect USB to uC USB pins.

**broken link removed**

I don't know whether uC will be able to communicate with BT this way but interfacing is as above.
Click to expand...

Jayanth, I am looking something that a BT module(Hardware) that can be soldered on the PCB with USB D+ and D- features or pin's so that it can interface with the microcontroller with traces. I do not require a USB connector fixed to that.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top