Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Bluetooth Interface(BTM 180) with microcontroller(Fujitsu SK-FR-144PMC-91467B)

Status
Not open for further replies.
K

Keith22

Junior Member level 1
Joined
Apr 25, 2013
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,407
Bluetooth Interface(BTM 180) with microcontroller(Fujitsu SK-FR-144PMC-91467B)
Hi,

I am doing a project where i have to interface a BTM180 with a Fujitsu SK-FR-144PMC-91467B microcontroller. I have paired the bluetooth device with the Laptop and that works fine. On the BTM180 itself i have soldered the Tx and Rx pins and connected them to the microcontroller. When i go to flash my code to the microcontroller using the flash programmer for the bluetooth port it does not work, any ideas? Also when in hyperterminal i can see my code been looped back using the USB but not the bluetooth.

Any help Guys??
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top