That is a good starting point
**broken link removed**
As a rule of thumb I will like also to add
Your DC blocks I assume are the coupling capacitors, well at the frequency of your operation chose a capacitor that its Impedance Zc=1/jωC is really small (1ohm for example ), however make sure that u operate below the self resonance of the capacitor. Same goes for the inductor, You want the inductor at your bias network to present a high impedance at any AC current, that means you need a high inductance value, how ever you need again to operate below self resonance.
Also Check AVX and ATC websites , they give some more information about Coupling,decoupling and DC blocks use for Capacitors.
**broken link removed**
**broken link removed**