May 21, 2010 #1 V v_kumar Full Member level 5 Joined Jun 2, 2004 Messages 272 Helped 18 Reputation 36 Reaction score 3 Trophy points 1,298 Location India Activity points 1,964 Hello All, Can anyone tell me if there is any way to create fanout at footprint level in Cadstar as we can do this in Allegro. This will help us in saving the time for Fanout later in each Layout when we use the same footprint. Thank you
Hello All, Can anyone tell me if there is any way to create fanout at footprint level in Cadstar as we can do this in Allegro. This will help us in saving the time for Fanout later in each Layout when we use the same footprint. Thank you
May 24, 2010 #2 cyberrat Advanced Member level 3 Joined Jun 19, 2001 Messages 902 Helped 87 Reputation 174 Reaction score 43 Trophy points 1,308 Location In the sewers of the U.K. Activity points 5,899 AFAIK you can save the fanout in Preditor. Another option would be to create a fanout with pads instead of vias (as you cannot have vias in a footprint).
AFAIK you can save the fanout in Preditor. Another option would be to create a fanout with pads instead of vias (as you cannot have vias in a footprint).