Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Best substrate materiall for 20 Ghz

Status
Not open for further replies.
R

ravi_iitb

Newbie level 3
Joined
Dec 9, 2010
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,303
Hii frens, I want to know that which substrate material would be best for high frequency application like for 20 GHz...

Thank you
 

Alumina with TiW/Au :-D (awesome, but $$$$$)

For more cost-effective materials, look into Rogers Corp High Freq Laminates, as vfone suggested.
 
Thnk You..
But which series of Rogers material would be most suitable...??
 

ravi_iitb said:
Thnk You..
But which series of Rogers material would be most suitable...??
Click to expand...

Start with the suggestions on this forum, but I'd also recommend that you read the vendor spec sheets for those materials and learn what aspects make them suitable for operation at these frequencies. Even a simple phone call/e-mail to one of Rogers' technical people could be an enlightening experience.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top