techie
Advanced Member level 3
benq m22
I am using BenQ M23 module (looks same as M22). The following is the terminal log. Can someone let me know what is the problem.
AT
OK
AT+CGDCONT=1,"IP","INTERNET"
OK
AT%CGPCO=1,"PAP,user,pass",1 (actual user and pass used)
OK
AT$DESTINFO="72.14.203.104",1,80
$DESTINFO: "72.14.203.104", 1, 80
OK
ATD*97#
Wait Socket Open
<0><0>
OK
<0>
Then nothing happens. Cannot downlaod HTTP file.
I can disconnect by +++(delay)ATH.
I am using BenQ M23 module (looks same as M22). The following is the terminal log. Can someone let me know what is the problem.
AT
OK
AT+CGDCONT=1,"IP","INTERNET"
OK
AT%CGPCO=1,"PAP,user,pass",1 (actual user and pass used)
OK
AT$DESTINFO="72.14.203.104",1,80
$DESTINFO: "72.14.203.104", 1, 80
OK
ATD*97#
Wait Socket Open
<0><0>
OK
<0>
Then nothing happens. Cannot downlaod HTTP file.
I can disconnect by +++(delay)ATH.