May 5, 2008 #1 vizpal Member level 2 Joined Apr 26, 2007 Messages 44 Helped 1 Reputation 2 Reaction score 0 Trophy points 1,286 Activity points 1,519 micron nand verilog model I have downloaded a NAND Verilog Model from the Micron Site. I want to check if my NAND Controller is performing Block Hunting correctly. For this how can I create some BAD Blocks. I understand that I need to create some value other than 8'hFF in the spare region to create a BAD Block . I want to know how this can be done in the Verilog Model.... :!: Please help me dude's....
micron nand verilog model I have downloaded a NAND Verilog Model from the Micron Site. I want to check if my NAND Controller is performing Block Hunting correctly. For this how can I create some BAD Blocks. I understand that I need to create some value other than 8'hFF in the spare region to create a BAD Block . I want to know how this can be done in the Verilog Model.... :!: Please help me dude's....