[AVR] AVR ATMEGA32 simulations in Proteus ISIS

Status
Not open for further replies.
K

KFChoong

Newbie level 4
Joined
Apr 13, 2010
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,347
Hi Sir,

I am using proteus ISIS release 7.4 Sp3. And I am new to Proteus ISIS simulation software.
when placing the microcontroller - ATMEGA32 16PU, I encounter a problem that this component from Proteus library has lack of 2 pins, namely Vcc and GND.
without these two pins, I am not able to start coding and simulate the circuit. Please find attached circuit for practice I2C between 2 microcontroller.
is there anyway I can add this two pins into the component so that I can add in the hex code and start simulate the circuit ? Please help me out on this problem.

May thanks for helping me. :wink:


Best Regards,
KF
 

Attachments

  • No-VCC&GND.JPG
    242.5 KB · Views: 231

yes both comments are helpful.
you not need to worry about VCC and GND pins.
if you want to change try shahbaz.ele's method.
 

kamranravian said:
yes both comments are helpful.
you not need to worry about VCC and GND pins.
if you want to change try shahbaz.ele's method.
Click to expand...

Hi Shahbaz, Jayanth, Kamranravian,

Many thanks for your help and advice. As you said, I will simulate this without worrying the power and ground pins.
I will consult you guys again when there is problem occurs after simulation.

Thank you.

Best Regards,
KF
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…