Thanks for the reply. I believe the board is an FX, not an SX as I mistakenly stated earlier.
I am looking for any reference designs for writing the strata Flash from the FPGA. I do not believe any boot image can fit in the Block Rams. Therefore, the Block Rams can only hold a loader program that copies the Flash into the SDRAM. However, I need an initial loader program for the FPGA to initialize the Flash with the boot image. Once the OS is running, updated boot images can be obtained via the ethernet connection.
Any suggestions on a reference design? Does anyone have Liniux running on the AVNET board?
Thanks.
---- Steve