i want a circuit such that you are able to periodically
switch ON and OFF AC power supply to the electric shock machine.
Time period should be observable and less than 10 sec
i want a circuit such that you are able to periodically
switch ON and OFF AC power supply to the electric shock machine.
Time period should be observable and less than 10 sec
Hi j.v.s.swathi
One of the simplest ways is using a triac and a trigger circuit . but there are several options available too . but it depends on you and your required current and type of your load .
Best Wishes
Goldsmith
For the switching device you have some choices. You can use:
Triac
SCRs
Relay
Solid State Relay
MOSFET (with some supporting circuitry to allow switching of AC)
IGBT (with some supporting circuitry to allow switching of AC)
Your method of drive will depend on the selected device.
For the controlling you will need a device that keeps track of the time and sends output drive signals as necessary. This will depend on your desired method of control. If you just require a repeating timer circuit, you can use the one shown by tpetar.
i want a circuit such that you are able to periodically
switch ON and OFF AC power supply to the electric shock machine.
Time period should be observable and less than 10 sec
You can use TRIAC as a switch by using opto-triac(MOC3041) it has a zero-crossing activation facility and for generate time delay you can use 555 Timer IC.