ATTINY 2313 programmer

electronicus · May 29, 2007

isp attiny

Look here: **broken link removed**
AT90S2313 and ATTiny2313 , ISP programmer.

cplia · May 29, 2007

how to program attiny

yes, I have now sucessfully programmed the ATtiny2313.

The factory provides this chip such that NO EXTERNAL crystal
oscillator is required (an internal clock is used instead). I didn't
know this on the first instance and took me sometime to figure
out what's happening with the clocking. The older brother AT90S2313
was functioning differently as far as clocking is concerned.

I properly modified the fuse bits (CKSEL3,2,1) using PonyProg,
and the chip is now clocked from the external crystal (1 crystal,
2 capacitors, as mentioned in the data sheet).

I am using the chip in a kit which controls 8 relays through a
telephone line (still working on this).

pasicr · May 30, 2007

attiny2313 projects

Hi Cplia,
What kind of programmer you use?
Can you explaine precisly setting for fuse bit,
I need to programm attiny2313 at 20MHz with crystal, projects is rgb generator for testing monitors,
regards

cplia · May 30, 2007

attiny2313 programmer isp

pasicr said:
Hi Cplia,
What kind of programmer you use?
Can you explaine precisly setting for fuse bit,
I need to programm attiny2313 at 20MHz with crystal, projects is rgb generator for testing monitors,
regards

I use PonyProg. The circuit I am using is the one that electronicus
mentioned above on this topic.

Since you want to clock your chip with a 20MHz crystal, then you need
to set CKSEL1=1, CKSEL2=1 and CKSEL3=1 (1 means unprogrammed,
as indicated in the data sheet for ATtiny2313, page.26). Fuses, determine the mode
of operation for the chip, e.g. to use internal instead of external clock, etc.
I guess an expert programmer can explain this with a better way.
good luck

wingsnow · Jun 27, 2007

attiny2313 circuit

cplia said:
pasicr said:

Hi Cplia,
What kind of programmer you use?
Can you explaine precisly setting for fuse bit,
I need to programm attiny2313 at 20MHz with crystal, projects is rgb generator for testing monitors,
regards

Click to expand...

I use PonyProg. The circuit I am using is the one that electronicus
mentioned above on this topic.

Since you want to clock your chip with a 20MHz crystal, then you need
to set CKSEL1=1, CKSEL2=1 and CKSEL3=1 (1 means unprogrammed,
as indicated in the data sheet for ATtiny2313, page.26). Fuses, determine the mode
of operation for the chip, e.g. to use internal instead of external clock, etc.
I guess an expert programmer can explain this with a better way.
good luck

Electronicus has mentioned more than one circuit. Which one do you refer to ?

Thansks

cplia · Jun 27, 2007

como programar atmel attiny2313

wingsnow said:
cplia said:

pasicr said:

Hi Cplia,
What kind of programmer you use?
Can you explaine precisly setting for fuse bit,
I need to programm attiny2313 at 20MHz with crystal, projects is rgb generator for testing monitors,
regards

Click to expand...

I use PonyProg. The circuit I am using is the one that electronicus
mentioned above on this topic.

Since you want to clock your chip with a 20MHz crystal, then you need
to set CKSEL1=1, CKSEL2=1 and CKSEL3=1 (1 means unprogrammed,
as indicated in the data sheet for ATtiny2313, page.26). Fuses, determine the mode
of operation for the chip, e.g. to use internal instead of external clock, etc.
I guess an expert programmer can explain this with a better way.
good luck

Click to expand...

Electronicus has mentioned more than one circuit. Which one do you refer to ?

Thansks

this one (see attachment): enjoy

wingsnow · Jun 28, 2007

programing attiny2313

electronicus said:
Look here: **broken link removed**
AT90S2313 and ATTiny2313 , ISP programmer.

This is the one Im looking for. (with max232)

Which software program will support this programmer ?

Thanks.

electronicus · Jun 28, 2007

attiny2313 programer circuits

wingsnow said:
electronicus said:

Look here: **broken link removed**
AT90S2313 and ATTiny2313 , ISP programmer.

Click to expand...

This is the one Im looking for. (with max232)

Which software program will support this programmer ?

Thanks.

**broken link removed**

wingsnow · Jun 28, 2007

2313 programer

electronicus said:
wingsnow said:

electronicus said:

Look here: **broken link removed**
AT90S2313 and ATTiny2313 , ISP programmer.

Click to expand...

This is the one Im looking for. (with max232)

Which software program will support this programmer ?

Thanks.

Click to expand...

**broken link removed**

IC-Prog 1.05D does not support ATtiny2313

nyangirojoe · Jun 11, 2009

at 2313 programmer

im doing my project regarding scrolling message display comprising 7*50 arrays of LEDs.I have the program/code to display and scroll alphanumeric set of characters.
Here is the Hex code you need to burn into your ATtiny2313 microcontroller:

Code:

:100000000AC022C021C020C02BC01EC01DC074C0A9
:100010001BC01AC019C011241FBECFEDCDBF10E008
:10002000A0E6B0E0E0E6F7E003C0C89531960D9297
:10003000A436B107D1F710E0A4E6B0E001C01D92EC
:10004000A33CB107E1F7B4C2DBCF982F21E08BB11D
:1000500082958695877081708217C9F79CB908953B
:100060001F920F920FB60F9211242F933F934F932D
:100070005F936F937F938F939F93AF93BF93EF9310
:10008000FF93809169008250823030F490916C002F
:1000900084E1891BDADF1FC080916F008823DCF0C8
:1000A000809170008F5F8093700080917000883322
:1000B00010F010927000809163008F5F8093630056
:1000C00080916300883310F01092630080916F007C
:1000D000815080936F00FF91EF91BF91AF919F91FD
:1000E0008F917F916F915F914F913F912F910F90E1
:1000F0000FBE0F901F9018951F920F920FB60F9280
:1001000011248F93EF93FF9380916C00843111F44D
:100110008CB118C080916D00E82FFF27E155FF4F8B
:100120008CB1808380916D008F5F80936D00809192
:100130006D00843111F410926D0080916C008F5F1E
:1001400080936C00FF91EF918F910F900FBE0F90F5
:100150001F90189580916C008823A1F080916E000B
:10016000E82FFF27E155FF4F8F5F80936E00E081FE
:10017000843111F410926E0080916C008150809354
:100180006C008E2F0895089590E080E08F5F8F3F80
:10019000E9F79F5F9236C8F308951F93DBDF8091E4
:1001A0006C008823E1F3D6DF982F8D3DB1F18E3DB1
:1001B00018F48823A1F045C08D3F19F08E3FD9F087
:1001C00040C0809169008093680084E0809369005A
:1001D00080E03BDF10926A0010926B0032C0809189
:1001E00069008093680082E08093690090936A00C0
:1001F00090936B0026C0809169008093680015E0A1
:10020000109369008DED21DF10936A0083E08093E5
:100210006B008FEF8093670014C08091690080931A
:10022000680093E09093690085E080936A00909362
:100230006B008BEF94E090936600809365001092C2
:1002400064001F91089589E00000815087FFFCCF72
:1002500008951F93CF9314E0C1E0959A959888B3C1
:100260008C2B88BB112309F412E0F89420917000C4
:10027000283308F020E0E22FFF27E958FF4F808164
:10028000812309F0929A949A94989298922F2F5FD2
:1002900080916300981761F77894110F9C2F9095C7
:1002A00088B3892388BBCFDFCC0FC7FFD6CFCF91D0
:1002B0001F91089591E080E0392F292F2670E82FB3
:1002C000FF27990F8F5F222321F0EF58FF4F3083D4
:1002D00003C0EF58FF4F2083863078F3089530E055
:1002E00091E0E1E7F0E024E0819180FD392B990F66
:1002F000215027FFF9CF373008F036E090916300A6
:100300009F5F332379F0A1E7B0E0232F983308F003
:1003100090E0E92FFF27E958FF4F8D9180839F5F81
:100320002150A1F7832F0895000000000000000075
:100330000895BF980895BF9A0895C79AF5DF089564
:10034000C798F2DF0895969AEFDF08959698ECDF4C
:100350000895F3DFF8DFF4DFF9DF0895F4DFEDDF70
:10036000F5DFEEDF08951F93CF93E3DFC79A10E028
:10037000C0E8E9DFB7991C2BE9DFC695D1F7DBDFD1
:10038000C798812FCF911F9108951F93CF93182F56
:10039000C0E8812F8C2311F0D0DF01C0D1DFD3DF83
:1003A000D5DFC695B1F7C5DFC8DFCDDF8FEFB799D1
:1003B00005C0C798C0DFCADF80E006C08150B9F72A
:1003C000C5DFBEDFB8DF81E0CF911F910895CF93E5
:1003D000C62F8093610060936000880F806AD5DF2C
:1003E000882319F48C2FD1DF811181E0CF910895FA
:1003F0000F931F93CF93C82F062F142FAADF612FBF
:10040000802FE5DF882329F48C2FBFDF182F882366
:1004100011F081E008C0A2DF809160008F5F8093BF
:100420006000B2DE812FCF911F910F9108951F932D
:10043000CF93C82F162F80916100C81721F48091A7
:100440006000681731F085DF612F8C2FC0DF8823B3
:1004500039F47FDFCC0F8C2F816A97DF882311F06E
:1004600080E014C080DFC82F79DF909160009F5F2B
:1004700090936000992349F4809161008F5F80938D
:100480006100883010F0909361008C2FCF911F9104
:100490000895EF92FF920F931F93CF939927282FE0
:1004A000392F220F331F220F331F280F391F832F9D
:1004B0009927182F1D5FC22F81E7E82E80E0F82EC4
:1004C00004E06C2F812FB3DFFF2DEE2D8193EE2EF4
:1004D000FF2ECF5F09F41F5F015007FFF2CFCF91CE
:1004E0001F910F91FF90EF900895CF93E3DE8091DD
:1004F0006900823008F054C0C0916C00CC2361F5D3
:1005000084E1A3DD80916900882319F58091620060
:100510008F5F809362008B3008F442C084E1809347
:10052000620060916A0080916B0081DF882319F47A
:1005300080936A000BC0ADDF80916A008F5F80936B
:100540006A00882369F580916B008F5F80936B0050
:1005500027C0C093620024C090916C0084E1891B85
:1005600074DD80916E00E82FFF27E155FF4F8081F9
:100570008F3F11F412DE14C0809162008B3020F0A6
:100580008150809362000CC0E5DD882319F08F3F15
:1005900009F07FDF1092620010926A0010926B00E7
:1005A0009EDE90916F00980F90936F00CF91089509
:1005B000CFEDD0E0DEBFCDBFE7E7F0E087E31192FB
:1005C000815087FFFCCF18BA12BA8FEF87BB81BB6F
:1005D00090E499BF8CE08EBD84E08BBD1ABC88E9A5
:1005E0008AB999B97894809169008430E9F45D9B67
:1005F000B0C090E080916B00833020F460916A007D
:1006000016DF982F9CB9992309F45BC080916A008A
:100610008F5F80936A00882309F09BC080916B00F4
:100620008F5F80936B0095C0823059F580916C008C
:100630008823E1F38FDDC82F60916B00633039F0C0
:1006400040916A00D5DE882311F4CC2369F410921E
:100650006A0010926B00809168008093690081307D
:10066000D1F11092620075C080916A008F5F809313
:100670006A008823D9F680916B008F5F80936B00AE
:10068000D5CF853061F5C4E060916A0080916B0040
:10069000CEDEDBDC80916A008F5F80936A00882366
:1006A00029F480916B008F5F80936B00C150C7FF6E
:1006B000EBCF90916700915090936700992309F0D8
:1006C00048C090936A0090936B008091680080937B
:1006D00069008130C9F584E1809362003AC08330BB
:1006E000C1F580916C00882339F134DD40916A00B6
:1006F00060916B007DDE282F882359F4809165007E
:100700009091660001979093660080936500892B15
:1007100021F48FEF80936400E4CF80916A008F5FB3
:1007200080936A00882329F480916B008F5F809307
:100730006B0020936400D5CF909164009F5F9093ED
:100740006400992321F4BDCF9093620002C01CDDA8
:10075000C8CF7FDD80916F0087FF45CFC6DE43CFD6
:04076000FFFF0A315C
:00000001FF

My project is consist of 256 characters with ATtiny2313 microcontroller. It uses seven BD139 and 74HC595 as a LED driver and shift register.
I programmed it in C... the code that scrolls the LEDs is there too(above) but i cant display letters,which is my goal. Does someone know something? ill appreciate

xxtigerxx · Jun 12, 2009

isp attiny2313

m8 you can buy the acr dragon it is like $50...

and do program and emulation..

astina76 · Jul 21, 2009

attiny45 parallel programmer

nyangirojoe said:
im doing my project regarding scrolling message display comprising 7*50 arrays of LEDs.I have the program/code to display and scroll alphanumeric set of characters.
Here is the Hex code you need to burn into your ATtiny2313 microcontroller:

My project is consist of 256 characters with ATtiny2313 microcontroller. It uses seven BD139 and 74HC595 as a LED driver and shift register.
I programmed it in C... the code that scrolls the LEDs is there too(above) but i cant display letters,which is my goal. Does someone know something? ill appreciate

Yeah.. I had the same problem.. can anyone solve this..?
this project was created by Tuomas tuononen..

coolk0415 · Mar 14, 2012

Please help me

ATTINY2313 fuse settings

Thank you

ATTINY 2313 programmer

electronicus

Full Member level 4

cplia

Member level 2

pasicr

pasicr

Advanced Member level 1

cplia

Member level 2

wingsnow

Newbie level 3

cplia

Member level 2

wingsnow

Newbie level 3

electronicus

Full Member level 4

wingsnow

Newbie level 3

nyangirojoe

Newbie level 6

xxtigerxx

Advanced Member level 1

astina76

Newbie level 2

suhartoyo

coolk0415

Newbie level 1

Attachments

Similar threads

ATTINY 2313 programmer

Full Member level 4

Member level 2

Advanced Member level 1

Member level 2

Newbie level 3

Member level 2

Newbie level 3

Full Member level 4

Newbie level 3

Newbie level 6

Advanced Member level 1

Newbie level 2

Newbie level 1

Attachments

Similar threads

Privacy & Transparency

Privacy & Transparency