Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

assigning Lumped port boundary condition(perfect H)

Status
Not open for further replies.

ucsun

Newbie level 5
Newbie level 5
Joined
Mar 22, 2012
Messages
9
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,344
I have a parallel plate capacitor. There is a plastic box in between the plates, touching the plates. I uesd lupmed port to excite this capacitor and used one face of this box to assign the port. The boundary condition for lumped port is to have to perfect E for the conductor on both sides of the port and perfect H for all other edges.Should I assign perfect H to all 3 faces of the pastic box which are perpendicular to the capaciotr plates or just to the two faces which are in touch with face and the port? This boundary condition will change my result for H magnitude in the box. Please comment if you have any idea. Thanks.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top