[PIC] As a begginer how to drive 7 segment using mikroc

[alimemory]

I start learning microcontroller 2weeks back.
I don't know anything on c programming even
programming.All right now I have little knowlegde on
thank.7«9100%Thanks for those people.
#include< THIS GREAT WEBSITE>;
Edaboard.
Right now i can teach people
HOW TO MADE SIMPLE LEDFLASH.
I PROBLEMS IS THAT
<1> How can i drive 7segment not copy and paste
<2>Can i use PORTA.B.C.D.E at same?
<3>What this means Portb=(010100100b)
step by step.
(no good grammer)

 

[wp100]

Hi,

As you are using Mikro C have you read this Mikro tutorial ?
http://www.mikroe.com/chapters/view/1/introduction-world-of-microcontrollers/

Plenty of 7 segment examples on Ytube
http://www.youtube.com/results?search_query=mikroc+seven+segments

You might also find some good info from these tutorials, though not in Mikro C
http://www.winpicprog.co.uk/pic_tutorial.htm
**broken link removed**
http://www.electro-tech-online.com/articles/nigel-goodwins-tutorials-in-c.467/
http://www.amqrp.org/elmer160/lessons/
http://www.epemag.wimborne.co.uk/resources.htm

Your other questions, 2 yes you can use most ports as you like, but need to be aware that many pins are multi-functional and for example, PortA is by default set to analogue mode you must set it to digital if you want to run something digital on those pins.

Portb=(010100100b) means that the data 01010010 0 is in 'b' binary form and for a pic16f877a it should only be 8 bits not 9

 

[Surender Reddy]

Please visit the following link, there you can find the multiple device interfacing
http://iblocks.in/learning-center/micro-controller/pic18f452/microc-ide/

- - - Updated - - -

Please visit the following link, there you can find the multiple device interfacing
http://iblocks.in/learning-center/micro-controller/pic18f452/microc-ide/