Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Array antenna p/a/t/c/h simulation in ADS momemtum

Status
Not open for further replies.
A

alard

Member level 4
Joined
Dec 2, 2004
Messages
70
Helped
4
Reputation
8
Reaction score
1
Trophy points
1,288
Activity points
551
Hello folks,

I am designing a array antenna used in 3gpp. I want to simulate one p/a/t/c/h in @ds momentun. I drill a hole in the ground plane to give the feeder. But it seems be impossible to do it in momentum? Could anyone give me some suggestions? Another question is where to put the port? I am really new in momentum. Thank you in advanced.

PS. I create substrate layer like
FREESPACE
Taconic
/////GND////

and Mentalization layers like
FREESPACE
-----Strip cond2
Taconic Via hole
//////GND/////
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top