Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

area calculated in xilinx

Status
Not open for further replies.
Lalitha Gosukonda said:
how to calculate the area in the xilinx tool in micro meters
Click to expand...

What for? A metric like that is useless when dealing with an FPGA. The area of a Xilinx FPGA die is the same for all devices with the same part number. If you want the area of the user logic portion of the die, that is basically useless as a metric to tell you anything about the utilization of the device. That is why the utilization reports have things like the number of slices/LUTs/BRAMs/DSP/etc elements are used.

Regards
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top