Arduino UNO as a Programmer

[imranahmed]

Please let me know that about my digital multimeter based on ATmega16 @ 8MHz int.osc..

And I have Arduino UNO but I want to program Atmega16 by using Arduino Code.

Can it is possible?

 

[tadeoman]

This video shows how to program an ATTiny. Maybe similar steps need to be followed to program an ATmega

https://www.youtube.com/watch?v=30rPt802n1k

Good luck!

 

[imranahmed]

Thank you for this video link this is very useful.

Dear I want to know where I do find built-in function lists and its working used in Arduino Programming.

Like===>> setup() , pinMode(x,y) , digitalWrite(x,y) , millis() , analogRead(x) , map(a,b,c,d,e,f) ,
constrain(x,y,z) , analogWrite() etc.

 

[tadeoman]

For a list of Arduino API functions, please look at:

https://arduino.cc/en/Reference/HomePage

 

[imranahmed]

Please let me know that can we generate hex file in Arduino environment?

or is there any Arduino Simulator available?

 

[MahmoudHassan]

you can include arduino libraries into Proteus
you will install hex file
Yes there is a HEX file you can find try to search your project in the C drive and you will find it
https://www.theengineeringprojects.com/2014/06/arduino-library-proteus.html

- - - Updated - - -

you can include arduino libraries into Proteus
you will install hex file
Yes there is a HEX file you can find try to search your project in the C drive and you will find it
http://www.theengineeringprojects.com/2014/06/arduino-library-proteus.html