Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

anyone know of a 5.8 GHz I/Q mixer?

Status
Not open for further replies.

biff44

Advanced Member level 6
Advanced Member level 6
Joined
Dec 24, 2004
Messages
5,059
Helped
1,376
Reputation
2,748
Reaction score
1,060
Trophy points
1,393
Location
New England, USA
Visit site
Activity points
37,988
I am looking for an I/Q mixer at 5.8 GHz ism band. Am using the HMC525lc4 now, but are there any others out there, especially any with built in op/amps at the I and Q outputs or maybe an LO amplifier built in (or possibly an onboard oscillator for LO)? Can not seem to find any.
 

you probably checked hmc951, it has lo and rf amps inside.
and hmc833 or max2870 for pll+vco maybe.
never seen one with build in opamps, you may need to use another opamp or IFDVGA for that.
 

Saw some advertising from Linear Technology in Microwave Journal about 5.8GHz mixer with LO and IF buffer. Check for it.
 

wow, nice find BigBoss! but no, it needs 5 volts, Lithium battery only puts out 3.3 to 2.7V. Not sure why semiconductor manufacturers do not seem to know this fact!
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top