Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Anyone know an ISO 5167 approved DP gas flow computer

Status
Not open for further replies.
M

mohamedgsh

Newbie level 3
Joined
Sep 15, 2005
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,300
hey guys, anyone know an approved flow computer (any manufacturer) with the following Orifice calculation codes:
- ISO 5167: for differential pressure
- ISO 6976: for relative density, base density and calorific value.
- AGA 8 : for compressibility.
Best regards
 

mohamedgsh said:
hey guys, anyone know an approved flow computer (any manufacturer) with the following Orifice calculation codes:
- ISO 5167: for differential pressure
- ISO 6976: for relative density, base density and calorific value.
- AGA 8 : for compressibility.
Best regards
Click to expand...

This may be several months too late, but there are Excel spreadsheets for ISO 5167 Orifice Design here
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top