Anyone can tell me how to simulate a digital PLL with matlab

digital pll matlab

and then implement this PLL using VHDL in FPGA design？

I am very intrested in it.

Thanks advance!!

Added after 25 minutes:

sorry. add another question.

Which book is OK when start FPGA design using matlab?

pll design matlab

There are many approaches

a) Go to Matlab File exchange and u will find many matlab codes for PLL
b) Designing PLL on hardware ( 1) U want to design PLL as phase synchronizer or Freqquency senthesis... as both require a different approaches

c) For Matlab and system generator of Xilinx u can port Matlab into working VHDL and eventually able to run on FPGA.. U can read Systemgenerator help file in xilinx or matlab site

4) There are many good books for digital frequency synthesis on FPGA u may visit..h**p://books.electromanics.com
5)If U want to design PLL for Communication system for tracking doppler of carrier signal then the approach is different .. There are many good thesis on this and papers too ... U can find good papers on PLL in IEEE section in this board.


**PLEASE PRESS HELPED BUTTON IF U WISH TO***

matlab pll design rar

Actually i dont know exactly but u can try in

www.matlabcental.com



regards
sagar