Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

any one using netburner mod5282 board

Status
Not open for further replies.
S

s3034585

Full Member level 4
Full Member level 4
Joined
May 24, 2004
Messages
226
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,296
Activity points
2,087
hi guys

is any one using netburner mod5282 board and its carrier board MOD-DEV-100.
i am using it for my project and trying to acess some test ports on the xilinx cpld xc9572xltq100. These ports are connected to IOpin 47-72. this board has onboard 7 seg lcd, dip sw and leds. along with the board there are some header files which give acess to the display, led and sw.

can any one pls tell me how to acess other ports on the same cpld.

thanks in advance
tama
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top