Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

antenna with CPWG with using cst mws

Status
Not open for further replies.
M

mury

Newbie level 5
Newbie level 5
Joined
Aug 18, 2015
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
71
Hello,
I am beginner at designing antennas and I have problem with impedance. I have coplanar waveguide in CST MWS, with width 1.275mm, gap 0.3, thickness of substrate 0.762 RO4350B, it giving me 50 ohms impedance.. and if I want to put into this waveguide nail antenna (17mm x 1.2 mm), must I match impedance right? But, I don't know, how to match it. Can you help me please? I am not sure, how can I find out impedance of nail antenna..

Thank you for every comment.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top