Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Antenna transmitter and receiver in HFSS

Status
Not open for further replies.
K

kae_jolie

Full Member level 4
Joined
Oct 13, 2006
Messages
234
Helped
9
Reputation
18
Reaction score
8
Trophy points
1,298
Activity points
3,158
This question has been asked before, but really no firm answer has been given from what I have seen in the posts.

Question: I need to simulate 2 antennas and measure the S21 between them.
Do I excite both antennas or just one considering both are matched?
What am I measuring if I excite both and what am I measuring if I just excite one?
Also, if I need to measure the power received by one, is the formula Pacc x S21^2?

I would appreciate direct answers to my questions without going into much theory.

Thanks.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top