Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Antenna design problem

Status
Not open for further replies.
A

ablendos

Junior Member level 3
Joined
Jan 8, 2004
Messages
31
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
246
Dear all:
I have a hard problem in antenna design.I must design a GSM antenan into
volume of 60x7x5mm3. And I need the BW about 140MHz in 900MHz.

The problem is that it is possible or not. I mean that it is the limited of physic.
Or someone can show me some equation to proof it.

THKs
 

You can try to use the idea of a tuned antenna, to be able to cover both bands, GSM850 and GSM900.
Here is an example:
http://lib.tkk.fi/Diss/2005/isbn9512277581/article7.pdf
I’ve tried something similar and work fine. Actually my design was simple than this one, using only one SPST switch that was active for low band.
 

Does that link work ? it didnt work for me
 

the link works to me .

Dear gunajraman:
i've downloaded it ,if you still can not down , send me your email , then i would send it to you .
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top