Vermes
Advanced Member level 4
This Uniamp power amplifier is one of the segments of a home made amplifier. The power amplifier was based on another design: LINK.
Indel transformer 2x30V 300W
Basic information:
- band 4Hz-50kHz
- THD 1kHz 1W<0,05%
- S/N (V2) 90-96dB 1W (A) – depending on the position of the volume potentiometer
- dynamic (V2) 107-114dB (A) – depending on the position of the volume potentiometer
The power amplifier has additional protections: LINK.
Functions:
- delayed switching the speaker (5 seconds)
- quick disconnecting the speaker
- protection against the DC component
- thermal protection
- possibility to switch A/B speakers
Housing:
- sides made of 38mm MDF material vaneered with apple tree
- 1,5mm brushed stainless steel
- front made of double glass 5mm each with 3mm gap between them (glass is dark, so you cannot see the electronics)
- the whole is screwed with hexagonal screws to the sides
- dimensions: 450mm width x 110mm height x 300mm depth (without sockets)
Pictures:
Link to original thread - Uniamp - koniec mocy