Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

amplifier frequency response..

Status
Not open for further replies.
A

amriths04

Full Member level 5
Joined
Jul 15, 2006
Messages
263
Helped
23
Reputation
46
Reaction score
9
Trophy points
1,298
Activity points
2,819
is the unity gain bandwidh of an open loop amplifier equal to the 3 dB bandwidth when it's in it's closed loop configuration?

why?
 

NOT AT ALL!

Firstly, the unity gain BW of amplifiers do not depend upon the feedback loop. Secondly, U can calculate the UGB in DB by adding the gain (in db) to ω3db (in log scale)
 

Hi amriths04:
the unity gain bandwidh = The frequency when
A(open-loop)=0db
 

this is a law.we say that this value is acceptable .(0.7) and attenuation is negligible.but in other freq the attenuation is high and not acceptable.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top