@ltium Designer net classes
thanx.
Added after 27 minutes:
this doesnt look good. big balls on a bus.
"04 Feb 2007 22:39 Re: @ltium Designer net classes
--------------------------------------------------------------------------------
Yes, net and component classes can be defined at the schematic level.
Right click on the project name in the Projects Panel. Select Project Options. One of the tabs is "Class Generation". Check the boxes at the bottom of the page that say "User Defined Classes". Now add your class parameter to the nets and/or components. For nets, use Place>Directives>Net Class. For parts, open the properties for the part and add a ComponentClass parameter. You can also use the parameter manager.
If the ECO wants to remove your classes, it's probably because there is a problem with your component links."
-how do you mean?
if the component links window says all components are matched, then?
in the schematics parameter manager, i have tried tried to add this parameter: NetClass to some nets, and add, edit, accept changes, validate... but here it didnt accept my changer, there are red crosses instead of green signs. so i couldnt add the parameter to the nets. this would be better, because this way i wouldnt have to add big simbols to all wires.