Altium designer helpm,Ethernet connector

Status
Not open for further replies.
K

K.Srikanthreddy

Junior Member level 2
Joined
Dec 8, 2011
Messages
20
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,392
1.After importing ethernet connector on to the board one line is coming,please help me why that line is coming. Please find the attachment below[Please find the attachment.][/Ethernet].
2.How to place mechanical pins.
 

Attachments

  • Ethernet.bmp
    237.7 KB · Views: 137

Open the ethernet connector from library file
Enable all layers by using menu "Tools" -> "Layers & Colors...". Click on "All Layers ON"
You should be able to view the hidden track by now. Click and delete the unwanted track

To place the mechanical pins, use menu "Place" -> "Pad" to insert a pad

Hope this helps

-Nishal
 
That is not a track,that is drc marker. why that is coming with that much line length
 

It may be 'Fill' which is touching the pad in top left corner. This causes DRC error.

Can you detail the steps you follow?
 
If it is a DRC marker then check you Preference settings for DRC marker size but it seems or to be a track which is giving drc error because it is shorting pins of connector to Mounting hole.

There is no option like mechanical pins in Altium you cab define as other pins aand give them any Pin name as to differentiate it from electical pins (I use to define "0" pin munber)
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…