Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Altium-3 D body (STEP Model) Allignment.

Status
Not open for further replies.

sujitpatil

Member level 1
Member level 1
Joined
Sep 14, 2011
Messages
36
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Pune,India
Activity points
1,517
Hello,
I am importing some STEP files into my Altium PCB Project. PCB Document contains 3 D PCB & Casing of PCB. so i need to align them at same origin. so that i will be in position to check size,clearance between PCB & casing.so How to align STEP files at the origin.
 

you can add a 0 origin to the step model when you import it. simply click on add in the snap points section at 0,0,0.
this will give you the same origin that is defined in the step model. 3d-body.png
 
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top