Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Alternatives for schottky diode and transistor

Status
Not open for further replies.

edmat

Newbie level 1
Joined
Jan 9, 2014
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
7
I am creating a smoke alarm circuit (corresponding PDF is attached herewith). In the circuit diagram, Schottky diode MBR0530 and transistor ZTX451 have been shown to be used. They are not locally available where I reside. Can anyone suggest alternatives for the 2 devices which I can then search in the market?
 

Attachments

  • smoke_detect_implement_msp430.pdf
    172.1 KB · Views: 73

The ZTX451 can be almost any small signal type.
The diode type is not critical as it runs at low voltage and low current but it MUST be a Schottky type. In that application it needs to go into conduction then block the voltage very rapidly and a normal silicon diode will not be able to do that.

Brian.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top