Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Allegro reference designator's text size

Status
Not open for further replies.

damian_s

Member level 1
Joined
Aug 18, 2005
Messages
34
Helped
0
Reputation
2
Reaction score
0
Trophy points
1,286
Location
Indonesia
Activity points
1,545
allegro text size

Hi all,

I am using Allegro 15.2 and I want to change component reference designator's text size manually but I don't know how to do it. If I try Edit -> Text, all I can do is just changing the text string but I cannot change the size of the text. Can anybody help me with this problem?

Thanks.
 

Uky

Member level 5
Joined
Sep 3, 2004
Messages
83
Helped
18
Reputation
36
Reaction score
4
Trophy points
1,288
Location
Swedish West Coast
Activity points
1,205
reference designator allegro

Look at "Edit|Text Sizes" (Drop down menu). First decide what size the text should be changed to or add a new size. Sizes are defined in "numbers" Then Edit|Change and use "Text" in the pick box(right menu). Then in Options(right menu), change the text size number. Then pick texts and change them.

If you are uncertain of what width you want, choose "0" and then assign a width for all "unassigned" widths in the post processing menu.
 

    damian_s

    points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top