Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] Alarm Using SIM900 module

Status
Not open for further replies.
S

Santhosh_cv

Newbie level 1
Joined
Nov 19, 2012
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,286
To use alarm function in sim900 use the command AT+CALA
SIM900 can save upto 5 alarms, use AT+CALA? to view all saved alarm to set a alarm use command AT+CALA="yy/mm/dd,hh:mm:ss" To set a reccuring alarm use the command AT+CALA="hh:mm:ss,X,0 where X should be empty alarm index to view all alarm use AT+CALA?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top