Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Advice about a 32 bits uC

Status
Not open for further replies.

lollobrigido

Full Member level 2
Joined
Dec 13, 2002
Messages
134
Helped
2
Reputation
4
Reaction score
5
Trophy points
1,298
Location
Italy
Activity points
1,025
Someone can give me an advice about a 32 bit microcontroller with these caracteristics:
- cheapest!!! :(
- hw multiplier
- serial port
- flash on chip
- on board programming
- fast :)

it's for motion control applications.
What about fujitsu uC @ 32 bits?

thx
Lollo
 

Have a look at MB91F364 - only 10 EUR: 32MHz, 256k Flash, 16k RAM, CAN, 4 UARTs, ADC, DAC - pretty nice.

Rgds. CDF
 

SH-2 Hitachi series can bee good..
still AT91 ARM Thumb series by ATMEL can be a good chioce
With the ARM you have stil more software avaliable...
Bye!
 

Look Samsung low cost SoC S3F441FX S3F443FX

h**p://w*w.samsungusa.com/download/semiconductors/system_lsi/um_s3f441fx.pdf
h**p://w*w.samsungusa.com/download/semiconductors/system_lsi/um_s3f443fx_rev0.pdf


h**p://w*w.elektroda.pl/eboard/viewtopic.php?t=3189&highlight=

h**p://w*w.samsungelectronics.com/semiconductors/search/datasheet.jsp?family=399
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top