Dmitrii
Newbie level 4
- Joined
- Feb 28, 2008
- Messages
- 6
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Vinnytsia, Ukraine
- Activity points
- 1,341
Hi, all!
I faced with the following error in ADS2017 during co-simulation:
--- ERROR ---------------------------------------------------------------------
A calibrated pin must not be positioned on an edge on which other pins are positioned. (Using a single calibrated pin simultaneously inseveral ports is also invalid in this respect.)
The pins involved are "Cs_P2" and "Rs_P2".
-------------------------------------------------------------------------------
Please help me to resolve it.
I faced with the following error in ADS2017 during co-simulation:
--- ERROR ---------------------------------------------------------------------
A calibrated pin must not be positioned on an edge on which other pins are positioned. (Using a single calibrated pin simultaneously inseveral ports is also invalid in this respect.)
The pins involved are "Cs_P2" and "Rs_P2".
-------------------------------------------------------------------------------
Please help me to resolve it.