Hey guys, new here hope we can get along. I'm doing my theses on hyperthermia and was hoping you could help me. I'm designing an antenna on ads momentum, that has a superstrate
Here's a picture of the antenna
here is what the layout looks like and their properties
layout
thickness(mm)
Er
tand
Mur
tand
freespace
-----------
superstrate
10
60
0.0018
1
0
------- -STRIP - cond
substrate
3.18
2.32
0.0012
1
0
////gnd////
here's the mesh I'm using
The mesh is pretty dense so as not to have convergence problems and i didn't so far, but when i changed my antenna to alter its resonance frequency and changed the frequency range to be able to see it, momentum wouldn't converge (i think, it said "S parameters show unphysical values for certain frequencies")
I'm not entirely new to momentum I've designed antennas on it before, anyway can anyone help me out. [I read a post where someone had convergence problems with his transmission line and other people told him to check the transmission line mesh, what's it do?]
Hey dude, thanks for replying. I'm using a single mode port of Z=50Ω. And the version of the ads I'm using is 2009. But i think i resolved the problem by setting the mesh frequency from blank to twice the maximum frequency. (took a lot of time, like an hour or so, but it worked). Now I'd like to know if you can import a layout desing from ads to cst, know anything thanks in advance.;-)