Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

ads limitations needed to simulate slotline at high freq

Status
Not open for further replies.

armsgroup

Advanced Member level 4
Joined
Feb 27, 2003
Messages
112
Helped
11
Reputation
22
Reaction score
3
Trophy points
1,298
Activity points
895
ads limitations

hi all
any one know real limitations for ADS momentum , I'm simulating very narrow slotline at high frequency with very thin film
here the parameters :
substrate1: 500um
substrate2(thin film): 1.5 um
slotwidth :10um
slot length : 5 mm
frequency 30GHz

i have completely wrong results , i don't know what is wrong is that because of ADS momentum limitations ???? and if yes please suggest to me how i can simulate this slotline
thanks
Amr
 

alexneverhurts

Newbie level 6
Joined
Jun 2, 2009
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,375
Re: ads limitations

From the given parameters, I can't see much oddity. Yet I'm also new to ADS. All I know is that I have simulated structures with 3um minimum dimension and 1mm maximum dimension, 20nm minimum dielectric layer, and 0.2um metal thickness, and the result seems to be correct.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top