oled development kit
Hi,
You can write your OLED driver.I suggest few steps,please take a look at it,it may help you:
1.start with studying the Actel CoreI2C ipcore,OLED interface in this kit is I2C,you will need the I2C master to access OLED.
2.Go through all the command to control and configure the OLED.
3.Try to initialize and clear the display.
4.If you know the VHDL,the VHDL code to access OLED is available for IGLOO ICICLE kit ,download it and see how to send the commands.
5.In last,write your own instruction in C language to display the text on OLED.Please note one more thing,OLED has no internal character generator,you will need the fonts to display the characters.I suggest 5x7 fonts for it.But you may use whatever you like.
Let me know if you have any problem with this.
regards,
Shitansh