accident detection system using mma8451

[kshitij_lakhani]

https://www.edaboard.com/showthread.php?t=244902

I have used the code provided in the thread discussion given above.
However , the accelerometer is detecting the accident , but when it comes to sending location via message , i am not receiving a message from the module.

I have separately checked the sim900A module on hyperterminal and it works perfectly fine. Also , when i connected the gps module to the pc , i could see the data received by gps on hyperterminal .

However , the initial poster of the link above was able to get the required results. Please help me . Its urgent . Thank you !!!!!

 

[ud23]

I don't know which code you are referring in the link.But if you are using the nex-robokits sample code then you need to call the UART send function in main routine for sending data on gps.

 

[kshitij_lakhani]

hey ud23 !
Thanks for the reply .

I am using the code that is available on the link below.
https://www.8051projects.net/download.php?view.237