Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[General] AC/DC bidirectional battery charger/discharger Firmware/Hardware simulation

Hasan2017

Member level 3
Joined
Oct 23, 2017
Messages
57
Helped
0
Reputation
0
Reaction score
0
Trophy points
6
Activity points
623
Hi,

My project diagram is similar to this idea,
BAT_CHR.JPG



Lets say input is 3p 380VAC, 60Hz, Main Transformer MTR runs at 20kHz, DC output should be 50-147 v, charging current 100A. Should have CC and CV mode of operation.

I need to implement FW with following facilities,

1. Shunt/ Temperature sensing

2. 3v AC to 16 bit ADC having channel current and voltage

3. CAN/SPI/SCI protocol

4. PF correction, PI or PID control

5. PWM for high frequency switching.



Kindly suggest any simulation model/ EVM board/tools to understand the system.
 

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top