Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

About USBDeviceTasks() in the USB-HID of PIC18F25k50

Status
Not open for further replies.

maniac84

Full Member level 6
Joined
Mar 4, 2012
Messages
337
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Activity points
3,661
Hi guys,

Currently my application of the pic is to become a converter of serial to usb. In other words, whatever I received on my serial side, I will transmit it out using USB port. I'm using baudrate of 9600.
I know that we have to call USBDeviceTasks() every 1ms right? I put USBDeviceTasks() routine in the main() loop. And I'm using interrupt ISR to receive from serial.
My problem is, whenever I have large amount of data (around 400 bytes) to received on the ISR of my serial, my USB side will hang. Is it because when I received large amount of data, the program will always be running the ISR routine causing that we need to wait more than 1ms to call USBDeviceTasks() and the USB connection is disconnected?
How do we connect it back?
 

nick703

Advanced Member level 1
Joined
Oct 17, 2011
Messages
414
Helped
21
Reputation
44
Reaction score
22
Trophy points
1,298
Location
surat
Activity points
3,872
u r using any FTDI chip to convert serial to usb ?
 

maniac84

Full Member level 6
Joined
Mar 4, 2012
Messages
337
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,298
Activity points
3,661
u r using any FTDI chip to convert serial to usb ?
Nope. I'm using the PIC18F25k50. I'm trying to write it's firmware to convert serial to usb. Any tips for it?
 

nick703

Advanced Member level 1
Joined
Oct 17, 2011
Messages
414
Helped
21
Reputation
44
Reaction score
22
Trophy points
1,298
Location
surat
Activity points
3,872
post your some code of your USB routine in main function bro ..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top