thank you.my question is lu_table_template(tcb773ptc){
variable_1 : constrained_pin_transition
index_1("0.1,0.4,0.7,1,2");
variable_2 : related_pin_transition
index_2("0.1,0.4,0.7,1,2");
}
cell (AN2D1) {
area : 70 ;
cell_footprint : "an2d1"
pin(A1) {
direction : input;
capacitance : 0.00901 ;
fanout_load : 0.00901 ;
}
pin(A2) {
direction : input;
capacitance : 0.00913 ;
fanout_load : 0.00913 ;
}
pin(Z) {
direction : output;
max_transition : 2.0;
function : "(A1 A2)";
timing() {
timing_sense : "positive_unate"
related_pin : "A1"
cell_rise( tcb773ptc_Core5x6d1 ) {
values("0.2631, 0.3463, 0.6761, 1.0050, 1.4990, 1.8280", \
"0.2812, 0.3654, 0.6940, 1.0230, 1.5170, 1.8480", \
"0.3099, 0.3944, 0.7236, 1.0520, 1.5460, 1.8740", \
"0.3438, 0.4289, 0.7573, 1.0860, 1.5790, 1.9070", \
"0.3776, 0.4670, 0.8062, 1.1370, 1.6310, 1.9600");
}
rise_transition( tcb773ptc_Core5x6d1 ) {
values("0.2960, 0.4951, 1.2969, 2.1111, 3.3344, 4.1495", \
"0.3036, 0.4940, 1.2988, 2.1113, 3.3344, 4.1498", \
"0.3062, 0.5019, 1.3009, 2.1122, 3.3337, 4.1498", \
"0.3227, 0.5127, 1.3078, 2.1165, 3.3369, 4.1516", \
"0.3616, 0.5553, 1.3415, 2.1457, 3.3580, 4.1689");
}
cell_fall( tcb773ptc_Core5x6d1 ) {
values("0.2276, 0.2877, 0.5124, 0.7357, 1.0710, 1.2940", \
"0.2597, 0.3198, 0.5460, 0.7692, 1.1040, 1.3270", \
"0.3176, 0.3793, 0.6045, 0.8274, 1.1620, 1.3850", \
"0.4093, 0.4730, 0.6993, 0.9221, 1.2560, 1.4800", \
"0.6132, 0.6843, 0.9263, 1.1530, 1.4880, 1.7110");
}
fall_transition( tcb773ptc_Core5x6d1 ) {
values("0.1830, 0.2846, 0.7154, 1.1560, 1.8230, 2.2677", \
"0.1911, 0.2873, 0.7165, 1.1567, 1.8227, 2.2683", \
"0.2019, 0.2985, 0.7201, 1.1586, 1.8230, 2.2685", \
"0.2258, 0.3213, 0.7313, 1.1638, 1.8257, 2.2702", \
"0.2895, 0.3841, 0.7828, 1.2038, 1.8520, 2.2903");
}
}
timing() {
timing_sense : "positive_unate"
related_pin : "A2"
cell_rise( tcb773ptc_Core5x6d1 ) {
values("0.2602, 0.3442, 0.6746, 1.0030, 1.4970, 1.8260", \
"0.2670, 0.3516, 0.6816, 1.0110, 1.5040, 1.8330", \
"0.2785, 0.3630, 0.6923, 1.0210, 1.5140, 1.8430", \
"0.2837, 0.3704, 0.7000, 1.0280, 1.5210, 1.8500", \
"0.2354, 0.3275, 0.6745, 1.0090, 1.5030, 1.8320");
}
rise_transition( tcb773ptc_Core5x6d1 ) {
values("0.2944, 0.4949, 1.2975, 2.1116, 3.3339, 4.1500", \
"0.3022, 0.4947, 1.2980, 2.1117, 3.3338, 4.1500", \
"0.3089, 0.5001, 1.3011, 2.1125, 3.3340, 4.1500", \
"0.3267, 0.5150, 1.3095, 2.1167, 3.3363, 4.1509", \
"0.3707, 0.5667, 1.3559, 2.1570, 3.3678, 4.1758");
}
cell_fall( tcb773ptc_Core5x6d1 ) {
values("0.2397, 0.3009, 0.5258, 0.7494, 1.0840, 1.3080", \
"0.2775, 0.3383, 0.5641, 0.7874, 1.1220, 1.3460", \
"0.3441, 0.4045, 0.6306, 0.8537, 1.1880, 1.4120", \
"0.4559, 0.5189, 0.7443, 0.9670, 1.3010, 1.5240", \
"0.7297, 0.7986, 1.0360, 1.2590, 1.5930, 1.8160");
}
fall_transition( tcb773ptc_Core5x6d1 ) {
values("0.1883, 0.2905, 0.7170, 1.1569, 1.8227, 2.2683", \
"0.1925, 0.2900, 0.7175, 1.1574, 1.8229, 2.2684", \
"0.2046, 0.3022, 0.7201, 1.1585, 1.8232, 2.2685", \
"0.2290, 0.3225, 0.7314, 1.1636, 1.8256, 2.2703", \
"0.3020, 0.3876, 0.7779, 1.1976, 1.8453, 2.2843");
}
}
}
internal_power( tcb773ptc_Core5x6d1 ) {
values("0.2755, 0.2931, 0.2654, 0.3024, 0.3278, 0.3071", \
"0.3157, 0.3253, 0.3008, 0.3350, 0.3002, 0.3488", \
"0.3732, 0.3795, 0.3491, 0.3799, 0.3465, 0.3835", \
"0.5234, 0.5202, 0.4874, 0.5109, 0.4776, 0.5137", \
"0.9454, 0.9393, 0.9273, 0.8992, 0.9072, 0.8876");
related_inputs : " A1 A2 "
related_outputs : " Z ";
}
} /* end of cell */
what is the values means ?is there any document introduce them?what regulation they follow?