a problem about the netlist genarated by spectre

Status
Not open for further replies.
M

mendenz

Junior Member level 1
Joined
Jul 7, 2004
Messages
15
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
153
the voltage source hasn't the define of voltage type in my netlist.
lt's a correct netlist:
V1(vdd gnd!) vsource dc=3 type=dc
but in my netlist,the voltage source is definded as follow:
V1(vdd gnd!) vsource dc=3
so,if the voltage source is pwl or pulse,the simultion can't be go on.


how to deal with the problem???
 

then put two arguments like you do dc=3 ac=0 and this will do it dont worry.
 

If you add a parameter of type and wave message to the source then run it, the results are shown as you expecte. However, I do not know what causes the error translation from the schematic.
Could any person know how to fix it?
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…