Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

A problem about the mpc860 I2C

Status
Not open for further replies.

nigx

Newbie level 6
Newbie level 6
Joined
Apr 21, 2002
Messages
11
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
6
mpc860.i2c

everyone familiar with mpc860 ,I found the mpc manual says it support the 7bit addressed I2C controller ,but not say only for 7bit addressed ,do you know how to program the I2C for 10 bit addressed I2C device .

may mpc860 just for 7bit I2C devices .

and I come another question ,mpc860 can't Read &Write I2C devices in the same which is 8bit address I2C device .
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top