Dec 12, 2006 #1 G Guru59 Full Member level 4 Joined Jul 10, 2006 Messages 217 Helped 7 Reputation 14 Reaction score 3 Trophy points 1,298 Activity points 2,812 hi everyone............ the doubt is...... what does the number '5' in CL5 refers to........ it is given as cycle request latency......but what does it infer to............. thanks
hi everyone............ the doubt is...... what does the number '5' in CL5 refers to........ it is given as cycle request latency......but what does it infer to............. thanks
Dec 13, 2006 #2 D dolby.yang Member level 4 Joined Mar 2, 2005 Messages 73 Helped 10 Reputation 20 Reaction score 2 Trophy points 1,288 Activity points 1,862 hi , the cl=5 means the required cycle number that the first bit data come out after u issued read comand.
hi , the cl=5 means the required cycle number that the first bit data come out after u issued read comand.
Dec 13, 2006 #3 X xstal Full Member level 2 Joined Oct 12, 2006 Messages 138 Helped 20 Reputation 40 Reaction score 0 Trophy points 1,296 Location USA Activity points 2,197 Latency means the number of clock cycles required to get the output after the input is given. CL5 means the first output will be available 5 clock pulses after the first read command is given. bye.
Latency means the number of clock cycles required to get the output after the input is given. CL5 means the first output will be available 5 clock pulses after the first read command is given. bye.
Dec 13, 2006 #4 V vinod_g Member level 4 Joined Nov 29, 2006 Messages 71 Helped 8 Reputation 16 Reaction score 2 Trophy points 1,288 Activity points 1,681 CL means the no of clock cycles it requires to appear the required data at output when the read signal is given
CL means the no of clock cycles it requires to appear the required data at output when the read signal is given